Architectural specs Key advantages
2"x2" tubular posts every 8'-0" feet for extra rigidity
Detailed cad drawings provided on all orders
Anti-rust powder coat finish
Custom configuration and heights
Welded wire mesh for added security
Easy assembly with nuts and bolts system
Options
- 16g expanded metal
- Cylinder locks
- 18g corrugated metal
With this storage option, you’ll get
- Security, thanks to the welded wire mesh at each intersection and the tubular design that offers more strength than traditional wire partitions
- Simple design with controlled access to space
- Versatile and interchangeable system that can be relocated or added to areas as needs may change
- Pre-punched components and tubular posts that can be easily installed using ordinary hand tools and detailed drawings provided by us
- Painted with baked grey powder coat over phosphate-treated steel for lasting durability and protection against corrosion
Like all Major Partitions products, the Wire Mesh Partitions are specially packaged using Steel Pallets for easy transportation without the worry of potential damage.
Materials
Panels
Panels shall be 10 gauge wire, spot welded into 2" x 2" x 1/8" squares (50mm x 50mm x 3.2mm wire) welded into an angle frame of 1-1/4" x 1-1/4" x 12 gauge angle (32mm x 32mm x 3mm) welded at every 8 inches. Panels 5 to 6 feet long receive 1/2" (12.7mm) rod stiffener, longer panels receive 2 rod stiffeners dividing the panelin equal sections. All panels shall be fastened to posts by using 1/4" x 2-3/4" zinc bolts and nuts.
Swing doors
Swing doors shall be made of the same material and method as panels with an added 1/2" rod (12.7mm) from center to corners. Doors shall be equipped with padlock hasps (option for cylinder lock),door strikes and 1-1/2" pair of hinges.
Posts
Posts shall be 2" x 2" x 16 gauge (50mm x 50mm x 2mm) square tubular steel welded to a base plate 2" x 6" x 1/4" (50mm x 150mm x 6.4mm) using two 2-3/4" x 3/8" anchor bolts.
Sliding doors
Sliding doors shall be made of the same material and method as panels reinforced with 1-1/4" (32mm) square tubing. Doors shall be supported with 2 sets of trolleys in a 2" x 2-1/2" track x 14 gauge (50 x 62mm).Doors shall be equipped with stoppers, trolleys, track supports, hasps and guide (option for cylinder lock).
Finish
Baked grey powder coat over phosphate treated steel.
